Back to blogPathologies

Buying a flat in Madrid in 2026: the five most common defects in 1960s and 1970s buildings

November 13, 2026 3 min read
Buying a flat in Madrid in 2026: the five most common defects in 1960s and 1970s buildings

The average home price in the city of Madrid was around 6,471 €/m² in August 2026 according to idealista, and the sharpest rises over the past year came in the southern districts: Usera (+20.2% year on year in June), Villa de Vallecas (+16.9%) and Carabanchel (+14.5%). They are also the districts with the most buildings from 1955 to 1979, built before the first thermal insulation standard and with installations that are now half a century old.

In the city of Madrid the building technical inspection (ITE) is compulsory from 30 years of age and repeated every ten, so almost all of these buildings have one. But the ITE looks at the building, not at your flat: neither the flat's electrical installation, nor the pipes, nor the damp in a bathroom appear in it.

The five defects we find most often

  1. Original electrical installation: no earth, no residual-current device and cables too thin for today's demand (air conditioning, induction hobs, car charging). Repair: 1,500 to 6,000 €.
  2. Lead or galvanised iron pipes: loss of pressure, cloudy water and leaks inside walls. Replacing the internal network costs 2,000 to 5,000 €, plus re-tiling.
  3. Asbestos-cement downpipes and roofs: they contain asbestos and removal requires a licensed company. It is usually a community levy, not an expense you can avoid.
  4. Damp in light wells and ground floors: leaks through unrendered inner façades and rising damp in ground floors and semi-basements. 3,000 to 8,000 € depending on the cause.
  5. Windows and insulation: aluminium frames without a thermal break or original iron frames, and walls without an insulated cavity. Not a serious defect, but it sets the heating bill and the condensation every winter.

What you can check yourself and what you cannot

ItemAt a viewingIn an inspection
Fuse boxSee whether it has an RCD and an earthTest the installation and check sockets and wiring
DampLook for stains and fresh paintThermal camera and moisture meter: what paint hides
PipesRun the taps and watch the pressureCheck material, leaks and the state of the drains
BuildingAsk about the ITE and leviesRead the ITE and the minutes, inspect common areas and roof

How much it weighs in the price

A 70 m² flat in Usera costs around 250,000 €. An electrical installation to renew and lead pipes easily add 6,000 to 8,000 € that do not appear in the listing. Documenting them before the arras contract is the difference between absorbing them and negotiating them: Revicasa clients obtain on average more than 14,500 € in discounts or repairs paid by the seller.

Inspection of a flat in Madrid from 299 €: licensed architect, more than 250 points checked and the report within 48 hours. If we find no problems, we refund the fee (conditions apply).

Sources: idealista price reports for June and August 2026; Madrid City Council, ordinance on building conservation (ITE from 30 years); Revicasa internal data.

Cover photo: Carabanchel, Madrid. Zarateman, CC0 (public domain), via Wikimedia Commons.

Revicasa

Written by

Revicasa

Revicasa architects team

Architects who inspect homes every week and explain what you should know before buying, selling or renovating.

Ready to inspect your home?

Detect issues before buying and decide with objective information.

Schedule inspection
Let's talk

Tell us what you need
and we'll help you

Leave us your details and we'll contact you within 24 hours to answer your questions about your home inspection.